Multiwall Roofing Accessories
Multiwall Roofing Accessories
Learn How To Assemble A Roof With Multiwall Polycarbonate Sheets
Multiwall Polycarbonate Sheet Fitting Instructions
-
Lean To Flashing Profile
€68.29 excl. VATLean to flashing profile for roof pitches 5 degrees – 45 degrees. Suitable for capex 40, 50, 60, 70 and snap down bars. Available in Brown or White.
-
Clear Polycarbonate Joining Profile
€15.80 excl. VATClear polycarbonate joining (Snap type) profile, suitable for joining Multiwall or solid polycarbonate sheeting between 4mm & 10mm.
Available in 3000mm, 4000mm, 5000mm and 6000mm lengths and is sold as 1 piece (Base & Cap).
***Please note: 4000mm is currently out of stock***
-
Capex 40 & 60 Wall Flashing Profile
€98.21 excl. VATSuitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures. Available in Brown or White for Capex 40 & 60.
-
Cresfinex 100 M2 Ridge Bar
€143.80 excl. VATA robust aluminium section suitable as standard for the ridge with a roof pitch angle of 15-35 degrees. Available in Brown or White.
-
Capex 40 & 60 Gable End Finishing Profile
€98.21 excl. VATCapex 40 & 60 Gable end finishing profile suitable for capping single, double or triple glazed glass, acrylic and polycarbonate structures. Available in Brown & White.
-
Cresfinex PVC Snap Cover for M2 Ridge Bar
€19.45 excl. VATA PVC snap tight cover suitable for M2 cresting profiles where crests are not used.
Size: 3000mm & 6000mm
Colours: Available in Brown or White
-
Cresfinex MK2 Aluminium Wall End Plate
€65.86 excl. VATAluminium radius end caps providing a radiused end finish for cresfinex M2 Ridge bar.
Size: 100mm
Available in Brown or White -
Cresfinex MK2 Aluminium Radius End Caps
€35.76 excl. VATAluminium radius end caps providing a radiused end finish for cresfinex M2 Ridge bar.
Size: 100mm
Available in Brown or White -
Polycarbonate H Profile Clear
€13.56 excl. VATPolycarbonate H Profile
Clear Polycarbonate H Profile.Suitable for joining multiwall or solid polycarbonate sheets.
PVC profiles are supplied in lengths of 3000mm and 6000mm to fit polycarbonate sheet widths of 6mm,10mm and 16mm.
-
Twinfix Rafter Glazing Bars
€37.05 excl. VATCapex Glazing Bar
Capex Bar Capex 40/60 bars for roof pitches of 5deg+. The capex bar is used where multi-wall polycarbonate roofing sheets, or solid flat sheets meet on the roof rafter.
-
Twinfix Aluminium F Profile
€31.00 excl. VATAluminium F Profile
The Aluminium is used at the edge of Multi-wall roofing sheet, where the sheet is being fixed to side of building, rafter or other substrate.
Available in White or Brown and a variey of sizes. -
PVC U Profile
€6.10 excl. VATPVC U Profile
A PVC plastic profile supplied as an accessory to close the end of Multi-wall rooofing sheet.
Colours Available: Clear, White & Brown
Sizes Available: 6mm, 10mm, 16mm & 25mm***Size 6mm availalbe in Clear Only***
PVC profiles are supplied in lengths of 2100mm, matching the 2100mm width of Multi-wall sheet, however PVC U profiles can be easily cut to size on site.
-
Butyl Flashing
€7.34 excl. VATButyl Flashing is ideal for sealing roofs, providing a barrier from water and air.
Available in Lead Or White Finish
Sold By The Linear Metre - €7.34 excl. VAT Per Linear Metre
-
Multiwall Polycarbonate Roofing Fixing Buttons
€9.90 excl. VATMultiwall Polycarbonate Roofing Fixing Buttons.
Pre-Packed Nylon fixing buttons complete with screws
Supplied in a pack of 10 with foam washers and suitbale length No.12 Pan Headed Slotted Screws
6mm – we offer white only.
10/16/25mm we offer white & brown.
-
Neutral Silicone 310ml Wurth
€7.72 excl. VATSilicone 310ml (794)n
A low modulus, non acid toxy silicone for use with polycarbonate roof sheet.
As some silicones can attack polycarbonate, a neutral silicone needs to be used with polycarbonate roof sheet.
Use neutral silicone to prevent leaks at joints and at all points where the roof sheet has been penetrated by fixing screws.