Multi-wall Roofing Sheet

The sheet has a UV high performance absorption layer co-extruded on the outer surface.
Typical applications include Lean-tos, BBQ shelters, Car ports, Smoking shelters etc.
The sheet is available in Clear and Opal and can be cut easily with a stanley knife or jig saw.
Opal is a whitish/cream colour which is translucent but not transparent.

The Aluminium is used at the egge of Multi-wall roofing sheet, where the sheet is being fixed to side of building, rafter or other substrate.

A PVC plastic profile supplied as an accessory to close the end of Multi-wall rooofing sheet. On hollow multi-wall sheet, ventilated tape is applied first to the end of the sheet, then the U profile is pushed on over to seal the end of the sheet. PVC profiles are supplied in lengths of 2100mm, matching the 2100mm width of Multi-wall sheet, however PVC U profiles can be easily cut to size on site.

Pre-Packed Nylon fixing buttons complete with screws
Supplied in a pack of 10 with foam washers and suitbale length No.12 Pan Headed Slotted Screws